| Prime PETG 6763 |
|
The most outstanding features about Prime PETG 6763 are high stiffness and good impact resistance at low temperature. It is clear and easy to thermoform. Prime PETG 6763 can be sterilized with gamma rays, is resistant to stress whitening and the scrap is recyclable. Applications:Ideal for applications such as:
ProcessingRecommended forming temperatures for forming Prime PETG 6763 are; Mold temperature = 100-140°F Sheet temperature = 280-300°F Plug temperature = 250-275°F Cycle times in seconds = 3-10 for <.050 thick sheet. Forming pressures = 30-40 PSI. Polarized lenses or a light box should be used to check for residual stress in the part. FinishingScratches can be repaired with a heat gun. Sawing and routing are best suited for cutting Prime PETG 6763. Circular and band saws generally produce the smoothest cut. Circular saws- number of teeth = 2-4 /in., blade thickness – 3/32 in. for sheet .040 - .375, use 1/8 in. for thicker sheet. The blade tooth rake angle should be 5-10º. For routing use a two-flute bit and run at 10,000 to 20,000 rpm. When drilling use speed of 1750 rpm. Bonding can be done by solvent or adhesives. Colors, Textures and CapabilitiesPrime PETG 6763 can easily be color matched to meet your specific requirements. Textures available; Smooth or Matte. Prime PETG 6763 can be extruded in either rolls or sheet and is offered in .010- .030 and up to 52" in width or in .060-.236 and up to 56" in. width. 
|
